Headline

Main module

TS02/M0026 MAIN MODULE TISK v6.9

The main module, is responsible for device control. Also supports printing of acquired signals and data. Allsow to store diagnosed vehicle and found faults into internal memory. Up to 4 measurements can be saved. These saved data can be transferred to a PC anytime to further process or backup the data.

Using a supplied software Measurement Archive one can browse through measurements, add notes or print. This main module is free of charge. TheMeasurement Archive utility is also free of charge and comes on the Installation CD TS02-diagnostik.

Required connection cables:

• TS02/011 Uploading cable, this cable is only required for PC connection

E-OBD a OBD-II

TS02/M0020 EOBD,OBDII 1.1

OBDII and its European version E-OBD is a standardized diagnostic system for vehicles and emission systems. Using this diagnostics ECUs of all european, japanese and american cars can be examined. The software supports 9 modes: Parameters, Service conditions, Fault memory, Diagnostic data clearing, Lambda probe test, System test, Random failures, Component test and ECU information.

Module allows performing diagnostics on european, american and japanese cars according to the ISO9141, ISO14230 (KWP2000) a SAE J1850 standards. This system is used since 1995 in the USA and since 2000 for all cars sold in Europe.

Required connection cables:

• TS02/017 cable EOBD, OBDII, CAN. This cable is required for serial diagnostics over the CAN bus and for some japanese and american car diagnostics with the OBD-II system. To diagnose all european and most asian cars using the E-OBD standard any OBD cable can be used (e.g. TS02/022 cable OBD KL).

FORD

TS02/M0025 FORD,EEC-V v1.0

Module for diagnostics of ECU of engines with the EEC-V system, i.e. manufactured since 1995. Allows reading and clearing fault memory, parameter readout and engine test.

TS02/M0003 FORD,EEC-IV v6.0

Module for diagnostics of ECU of engines with the EEC-IV system, i.e. manufactured since 1994. Allows reading and clearing fault memory With the SEFI 16v engine using DCL fault read, parameter readout and engine test. (Requires cables TS02/019 and TS02/017+TS02/021).

Required connection cables:

• TS02/017 cable EOBD, OBDII, CAN cable pro EEC-V
• TS02/019 cable FORD DCL 93<95
• TS02/021 cable FORD DCL OBD 95< (adaptor from OBD II)
• TS02/006 cable FORD III 89 < 94
• TS02/012 cable FORD II < 89 (adaptor from FORD III) only for older cars; on request only.

Fiat, Alfa Romeo, Lancia

TS02/M0032 Fiat, Alfa, Lancia, Benzín v6.0

Module for diagnostics of ECUs of gasoline engines made by Bosch, Magneti Marelli, GM and Hitachi manufactured before 2004. Allows reading and clearing fault memory, parameter readout and actuators test.

TS02/M0033 Fiat, Alfa, Lancia Diesel v1.0

Module for diagnostics of ECUs of diesel engines equipped with Bosch or Lucas systems, mainly with JTD fuel injection. Diagnostics of most of EGR valves is possible. Allows reading and clearing fault memory, parameter readout and actuator test. For vehicles manufactured before 2003.

TS02/M0034 Fiat, Alfa, Lancia, Airbag v1.0

Supports Allied, TRW, Breed, Autoliv and Siemens units. Allows reading and clearing fault memory, parameter readout (wiring impedance, conditions). For vehicles manufactured before 2003.

TS02/M0043 Fiat, Alfa, Lancia, ABS v1.0

Moduel for diagnostics of ABS and ABS/ASR systems ECUs made by Bosch, Teves and Lucas until 2004. Allows reading and clearing fault memory, parameter readout and actuator tests.

Required connection cables:

• TS02/008 cable FIAT
• TS02/022 cable OBD KL

OPEL

TS02/M0037 OPEL, Benzín v7.0

Module for diagnostics of ECUs of engines equipped with Motronic, Simtec a Multec until 2004. Allows reading and clearing fault memory, parameter readout and actuator tests.

TS02/M0038 OPEL, Diesel v1.0

Module for diagnostics of ECUs of engines equipped with the DDE 2.1, EDC 15M and HDRC systems manufactured before 2004. Allows reading and clearing fault memory, parameter readout and actuator tests.

TS02/M0041 OPEL, ABS/ASR v2.0

Module for diagnostics of ECUs of  ABS and ABS/ASR, Bosch and Lucas systems made before 2004. Allows reading and clearing fault memory, parameter readout and actuator tests.

TS02/M0040 OPEL, Airbag v2.0

Module for diagnostics of ECUs of Airbags, SRS4B, SRS4B/S, SAB6, SAB6m and SAB8 systems manufactured before 2004. Allows reading and clearing fault memory and parameter readout.

TS02/M0042 OPEL, IMMO v1.0

Module for diagnosing immobilizer and central locking, systems IMMO I and IMMO II and remote control of the central locking made before 2004. Allows reading and clearing fault memory and parameter readout. Above all allows entering the secret code and adding/removing keys or remote controls.

Required connection cables:

• TS02/004 cable OPEL Multec 2
• TS02/014 cable OPEL Motronic, Multec 1, ABS
• TS02/022 cable OBD KL

Peugeot,Citroen

TS02/M0019 PEUGEOT,Citroen, Benzin v1.

Module for diagnostics of ECUs of combustion engines by Bosch, Magnetti Marelli, Sagem and Siemens manufactured before 2002. Allows reading and clearing fault memory, parameter readout and actuator tests.

TS02/M0022 PEUGEOT,Citroen, Diesel v1.1

Module for diagnostics of ECUs of diesel engines equipped with Bosch or Lucas systems including CommonRail engines manufactured before 2002. Allows reading and clearing fault memory, parameter readout and actuator tests.

TS02/M0023 PEUGEOT,Citroen, ABS v1.0

Module for diagnostics of ECUs of ABS a ABS/ASR systems installed in most vehicles manufactured before 2002. Supports Bosch and Teves systems. Allows reading and clearing fault memory, parameter readout and actuator tests.

TS02/M0024 PEUGEOT,Citroen, Airbag v1.0

Module for diagnostics of ECUs of Airbagss in vehicles manufactured before 2001 (partly 2002). Allows reading and clearing fault memory.

TS02/M0004 PEUGEOT, Citroen, Motor BC v5.3

Module for engine diagnostics of vehicles of vehicles manufactured before 1995. Allows reading and clearing fault memory and actuator tests.

TS02/M0018 PEUGEOT, Citroen, ABS BC v1.0

Module for diagnostics of ABS ECUs made before 1995. Allows reading and clearing fault memory.

Required connection cables:

• TS02/015 cable PEUGEOT KL
• TS02/022 cable OBD KL
• TS02/018 cable PEUGEOT 30

Renault

TS02/M0028 RENAULT, Benzin v6.0

Module for diagnostics of combustion engines ECUs equipped with Bendix, Renix and Fenix, as well as Siemens Sirius, Sagem, Bosch, Magnetti-Marelli and Hitachi systems. For vehicles manufactured before 2003. Pokrytí do 2002 včetně. Allows reading and clearing fault memory, parameter and state readout and actuator tests, coding.

TS02/M0029 RENAULT, Diesel v1.0

Module for diagnostics of ECUs of diesel engines 1,9/2,2dTi and 1,5/1,9/2,2/3.0 dCi (Common Rail). Bosch, Lucas, Delco and Isuzu systems. Supports vehicles manufactured before 2004.Pokrytí do 2003 včetně. Allows reading and clearing fault memory, parameter and state readout and actuator tests, coding.

TS02/M0027 RENAULT, Airbag v1.0

Supports Autoliv, Bosch and Siemens systems. Allows to read and clear fault memory, parameter readout (wiring impedance). It is also possible to deactivate and active the unit. For vehicles made before 2003.

TS02/M0031 RENAULT, IMMO v1.0

This module is used to add or change of keys and cards. Allows parameter readout (number of keys), entering the secret code and adding a new key. For vehicles manufactured before 2003.

Required connection cables:

• TS02/022 cable OBD KL or TS02/017 cable EOBD, OBDII, CAN
• TS02/009 cable RENAULT B

VolksWagen, Škoda, Audi, Seat

TS02/M0030 VW-group v7.0

Module for diagnostics of all ECUs of all Audi, Seat, Škoda a VW vehicles. Allows all functions as VAG, reading and clearing fault memory, parameter readout, actuator tests, adaptation, initial setup, coding, Readyness code and login on a particular ECU. With these functions one can even make changes of the ECUs, keys, clear inspection and oil intervals etc. Supports both KWP1281 and newer KWP2000 protocols. Diagnostics can also be performed via the K2 line (new diagnostics line in new Audi vehicles made after 2002; for diagnostics of navigation system, seats, headlights, car radio, etc. requires the OBD KL cable).

Required connection cables:

• TS02/022 cable OBD KL or TS02/023 cable VW OBD
• TS02/024 cable Audi + Škoda
• TS02/020 cable VW LT – only an adaptor for WV LT

Most interesting cables

• TS02/017 E-OBD. This cable has build in electronics supporting K-line, CAN ISO 11519 and SAE J1850 (PWM and VPW).
• TS02/022 OBD KL. This cable supports diagnostics on the K line on all OBD pins of the connector. Equipped with short circuit protection.
• The new OBD KL cable replaces all OBD cables. It is an intelligent cable allowing diagnostics on all pins of the OBD connector!!