LUN 1760 - Arinc Hub/Data Concentrator

ARINC Hub is device primary designed for multiplexing several ARINC429 buses into two. Additionally it is capable of receiving subset of NMEA/ARNAV/Northstar messages over RS232/RS422 and reinterpreting them to ARINC429 messages. Device supports both high and low speed ARINC429 buses as inputs and outputs. Device has hardware interfaces ARINC825 and MIL1553, but in basic configuration are not supported.

 

 

 

 Technical specification

Peripheries
RS 232/422 2× input port
RS 232 1× service port
ARINC 429 RX 4× input port
ARINC 429 TX 2× output port
MILL 1553 (optional) 2× bus
DIN (optional) 2× digital input
GPIO (optional) 4× digital input or 2× relay output

 

General parameters
Dimensions 177 × 39 × 134 mm
Weight 1000 g ± 10 %
Voltage (nom.) 27,5 V DC
Voltage (operative) 11...30 V DC
Current (nom.) 0,3 A
Power consumption 8,25 W
Humidity max. 95 %
Operating temperature -55 - 70 °C
Storage temperature -55 - 85 °C
Connector Circular 37 pin

Block diagram

lun 1760 block diagram

* Note: This is an optional configuration

 fb icon